This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
chara:coude_alignment_procedure [2021/06/02 18:56] gail_stargazer |
chara:coude_alignment_procedure [2021/06/02 18:59] gail_stargazer |
||
---|---|---|---|
Line 3: | Line 3: | ||
Written by Judit Sturmann on 2021 June 1. | Written by Judit Sturmann on 2021 June 1. | ||
- | ==== Preparation ==== | + | ==== Preparation |
* Make sure the vacuum is below 5 torr in the pipe. | * Make sure the vacuum is below 5 torr in the pipe. | ||
Line 23: | Line 23: | ||
As of 6/1/2021 only E2 has the new cones. | As of 6/1/2021 only E2 has the new cones. | ||
- | ==== | + | ==== M7 adjustment based on laser in AQUISITION camera ==== |
* Close the Beacon Flat cover, and Fiber cover on AOB | * Close the Beacon Flat cover, and Fiber cover on AOB | ||
Line 49: | Line 49: | ||
* Adjust Beacon focus to labwfs: hit BEAC FOC in labao gui. After that adjust focus to twfs: hit FOCUS WFS in twfs gui. | * Adjust Beacon focus to labwfs: hit BEAC FOC in labao gui. After that adjust focus to twfs: hit FOCUS WFS in twfs gui. | ||
* Go to the AOB ENG tab on the hut engineering gui and save the new default M7 position by hitting the “DICHROIC POSITION” (or similar) button, and then “SAVE ..(stg)”. [<this button is in the same row as the DICHROIC POSITION button.] A new configuration file is now saved, that also includes the tilts of beacon flat, AOB splitter, and focuses. | * Go to the AOB ENG tab on the hut engineering gui and save the new default M7 position by hitting the “DICHROIC POSITION” (or similar) button, and then “SAVE ..(stg)”. [<this button is in the same row as the DICHROIC POSITION button.] A new configuration file is now saved, that also includes the tilts of beacon flat, AOB splitter, and focuses. | ||
+ | |||
+ | ==== Revision History | ||
+ | |||
+ | * Gail Schaefer added to wiki page on 6/2/2021. | ||