This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
chara:trouble_shooting [2018/07/05 11:12] jones [**I can't change the camera settings on the TV**] |
chara:trouble_shooting [2018/07/05 11:17] jones [Adding an anchor to the wiki page] |
||
---|---|---|---|
Line 95: | Line 95: | ||
\\ | \\ | ||
====I can't change the camera settings on the TV==== | ====I can't change the camera settings on the TV==== | ||
- | \\ The HUT servers control functions such as finder and acq exposure times and gains, heater and dehumidifier usage, and various AO functions. An observer may find that the camera settings do not display or are not adjustable. The HUT server may be the cause if it has quit. To see if it is the server, open the HUT gui for the desired telescope from the CHARA menu. If the camera settings are displayed and the settings can be changed from the gui, then the HUT server is ok. Restart the telescope server to reopen the connection to the HUT server and hit reopen on Cosmic Debris as well. If the gui is not functioning, | + | \\ The HUT servers control functions such as finder and acq exposure times and gains, heater and dehumidifier usage, and various AO functions. An observer may find that the camera settings do not display or are not adjustable. The HUT server may be the cause if it has quit. To see if it is the server, open the HUT gui for the desired telescope from the CHARA menu. If the camera settings are displayed and the settings can be changed from the gui, then the HUT server is ok. Restart the telescope server to reopen the connection to the HUT server and hit reopen on Cosmic Debris as well. If the gui is not functioning, |
===== Tiptilt Server ===== | ===== Tiptilt Server ===== | ||
\\ The tiptilt server controls the CCD based tiptilt detection system.\\ \\ Before you start the tiptilt server, you must ensure that the power to the cooling system and the CCD iteslf is on. It is extremely important that the cooler be running before you turn on the CCD and is only turned off if you are sure the CCD is NOT running. You can start the server from the X windows menu or with the command xtiptilt.\\ \\ Note that there are background counts and read noise to deal with. Whenever you change the frame rate, please ensure that the bias frame is OK. The server will attempt to load an old bias frame that should work, but if things are not working, try making a new bias frame by ensuring that the detector is in the dark and typing " | \\ The tiptilt server controls the CCD based tiptilt detection system.\\ \\ Before you start the tiptilt server, you must ensure that the power to the cooling system and the CCD iteslf is on. It is extremely important that the cooler be running before you turn on the CCD and is only turned off if you are sure the CCD is NOT running. You can start the server from the X windows menu or with the command xtiptilt.\\ \\ Note that there are background counts and read noise to deal with. Whenever you change the frame rate, please ensure that the bias frame is OK. The server will attempt to load an old bias frame that should work, but if things are not working, try making a new bias frame by ensuring that the detector is in the dark and typing " | ||
Line 135: | Line 135: | ||
Try using a slower frame rate or increasing the NSUM. Also ensure that the acquistion is properly aligned with the laser. To change the frame rate, click the [EXP] button on the tiptilt GUI and enter a longer integration time. Remember to change " | Try using a slower frame rate or increasing the NSUM. Also ensure that the acquistion is properly aligned with the laser. To change the frame rate, click the [EXP] button on the tiptilt GUI and enter a longer integration time. Remember to change " | ||
==== Tiptilt counts are negative ==== | ==== Tiptilt counts are negative ==== | ||
- | The bias frame is bad. Get a new one or turn it off.\\ \\ [[/ | + | The bias frame is bad. Get a new one or turn it off.\\ |
- | ===== __OPLE | + | =====OPLE and Metrology===== |
\\ | \\ | ||
==== OPLE Server doesn' | ==== OPLE Server doesn' | ||
Line 148: | Line 148: | ||
* Type "make install" | * Type "make install" | ||
* This will install run_ople. Try opening the ople server again. | * This will install run_ople. Try opening the ople server again. | ||
- | ==== **Metrology and Homing carts** ==== | + | ====Metrology and Homing carts==== |
* Good metrology signals are important to the proper positioning of the carts. Monitor the signal strength by running [RUN MULTIPLE] on the Metrology Monitor. Place the windows above the TV windows for each scope you are using. They should show white sine waves that are around the height of the window. Erratic, fluctuating waves indicate self-interference or a weak signal. This may cause the carts to lose their place as the signal strength falls too low. Red waves indicate that some displayed signal has gone too low and the carts will all need to be homed. A careful adjustment of the MET2 mirror can sometimes bring the signal back. Do not adjust the MET1 mirror. | * Good metrology signals are important to the proper positioning of the carts. Monitor the signal strength by running [RUN MULTIPLE] on the Metrology Monitor. Place the windows above the TV windows for each scope you are using. They should show white sine waves that are around the height of the window. Erratic, fluctuating waves indicate self-interference or a weak signal. This may cause the carts to lose their place as the signal strength falls too low. Red waves indicate that some displayed signal has gone too low and the carts will all need to be homed. A careful adjustment of the MET2 mirror can sometimes bring the signal back. Do not adjust the MET1 mirror. | ||
* To home the carts, turn off the [OL] and [MAN] buttons on each cart and it will automatically return to the front switch. If the cart has no issue, it will arrive at the target position of 0m and the home switch at the same time. The X in the OPLE server under the HM will indicate it has homed to the home switch. If a cart does not reach the home switch when it returns to position 0m, it was lost and likely the cause of the difficulty in finding fringes. Hit the [HOME] button and it should move forward and trigger the home switch. Hit [TRACK] to home it to the new home position. | * To home the carts, turn off the [OL] and [MAN] buttons on each cart and it will automatically return to the front switch. If the cart has no issue, it will arrive at the target position of 0m and the home switch at the same time. The X in the OPLE server under the HM will indicate it has homed to the home switch. If a cart does not reach the home switch when it returns to position 0m, it was lost and likely the cause of the difficulty in finding fringes. Hit the [HOME] button and it should move forward and trigger the home switch. Hit [TRACK] to home it to the new home position. | ||
- | \\ [[/ | + | =====Beam Samplers===== |
- | ===== __Beam Samplers__ | + | |
\\ | \\ | ||
==== Beam Samplers are not moving ==== | ==== Beam Samplers are not moving ==== | ||
Line 168: | Line 167: | ||
The most common cause for getting multiple copies of a server is using the socket manage RESTART button, which is flaky at best. Don't do this. If you need to restart a server you should do it manually.\\ \\ 1. Make sure you are logged into the right machine:\\ \\ ssh ctrscrut\\ \\ 2. If you are not sure see if the socket manager will tell you. If it doesn' | The most common cause for getting multiple copies of a server is using the socket manage RESTART button, which is flaky at best. Don't do this. If you need to restart a server you should do it manually.\\ \\ 1. Make sure you are logged into the right machine:\\ \\ ssh ctrscrut\\ \\ 2. If you are not sure see if the socket manager will tell you. If it doesn' | ||
==== " | ==== " | ||
- | \\ Cosmic Debris reports " | + | \\ Cosmic Debris reports " |
- | ===== __Remote Observing__ | + | =====Remote Observing===== |
\\ | \\ | ||
==== VPN connection is not working ==== | ==== VPN connection is not working ==== | ||
Line 180: | Line 179: | ||
* If either Phase 1 or Phase 2 states say IDLE for a given VPN, then you need to re-establish the connection. To do this, click on the " | * If either Phase 1 or Phase 2 states say IDLE for a given VPN, then you need to re-establish the connection. To do this, click on the " | ||
* Make sure to close Firefox by using CTRL-Q to quit the program and not just close the window. | * Make sure to close Firefox by using CTRL-Q to quit the program and not just close the window. | ||
- | \\ [[/ | + | =====General Problems===== |
- | ===== __General Problems__ | + | |
\\ | \\ | ||
==== GUIs are frozen ==== | ==== GUIs are frozen ==== | ||
- | Check to see if Sockman is working. Click the [LIST] button on sockman. If the list doesn' | + | Check to see if Sockman is working. Click the [LIST] button on sockman. If the list doesn' |
==== Server display is blank or filled with jibberish ==== | ==== Server display is blank or filled with jibberish ==== | ||
Line 203: | Line 201: | ||
DBADD is a command entered in a terminal window that allows you to add a star to the CHARA database or look up a name of a star, nova or AGN to see if it already has a CHARA number. Valid requests can look like dbadd Vega or dbadd HD 123456. Identifiers for a target can be a common name, an IRC, HR, HD, SAO, FK5, HIP, GJ, or 2MASS designation. If a star, AGN or nova is in the database, it will return a CHARA number.\\ \\ __Targets that are not in the CHARA database__\\ \\ If a star, nova or AGN is not in the CHARA database, dbadd will query the SIMBAD database to see if it can be found there. If it returns a result, the target' | DBADD is a command entered in a terminal window that allows you to add a star to the CHARA database or look up a name of a star, nova or AGN to see if it already has a CHARA number. Valid requests can look like dbadd Vega or dbadd HD 123456. Identifiers for a target can be a common name, an IRC, HR, HD, SAO, FK5, HIP, GJ, or 2MASS designation. If a star, AGN or nova is in the database, it will return a CHARA number.\\ \\ __Targets that are not in the CHARA database__\\ \\ If a star, nova or AGN is not in the CHARA database, dbadd will query the SIMBAD database to see if it can be found there. If it returns a result, the target' | ||
==== Adding an anchor to the wiki page ==== | ==== Adding an anchor to the wiki page ==== | ||
- | To add an anchor to the wikipage, type the following where you want the anchor inserted (without the spaces between the symbols): | + | To add an anchor to the wikipage, type the following where you want the anchor inserted (without the spaces between the symbols): |
==== " | ==== " | ||
\\ Cosmic Debris reports " | \\ Cosmic Debris reports " |