chara:trouble_shooting
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
chara:trouble_shooting [2021/11/04 17:20] charaobs |
chara:trouble_shooting [2021/11/04 17:21] charaobs [Can't find fringes] |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| This is a list of simple things to check if you can't find fringes: | This is a list of simple things to check if you can't find fringes: | ||
| - | * Were the clocks synced? Make sure the [SYNC CLOCKS] button on Cosmic Debris has been pushed to start the night. If the OPLE server does not display the correct CHARA time and the errors don't read (0) or (1), the clocks were not synced. As the VME runs on its own clock and does not use the NTP server, it can drift over the course of the night and cause problems with finding fringes, even if it was synced at the start of the night. Syncing the clocks multiple time during the night may help to avoid this hidden clock problem. | + | * Were the clocks synced? Make sure the [SYNC CLOCKS] button on Cosmic Debris has been pushed to start the night. If the OPLE server does not display the correct CHARA time and the errors don't read (0) or (1), the clocks were not synced. |
| * Did the Astrolib update on OPLE? If the job queue is stopped too soon after slewing on Cosmic Debris, the correct calculations for the carts will not be done by OPLE and you may be searching for fringes with the wrong star data. Hit STAR ACQUIRED on CD to update ople. The proper star can also be entered by typing hd #### into the OPLE server and hitting ENTER. | * Did the Astrolib update on OPLE? If the job queue is stopped too soon after slewing on Cosmic Debris, the correct calculations for the carts will not be done by OPLE and you may be searching for fringes with the wrong star data. Hit STAR ACQUIRED on CD to update ople. The proper star can also be entered by typing hd #### into the OPLE server and hitting ENTER. | ||
| * Are the PoP's correct? After a PoP change, the PoP's are sometimes not updated in CD or ople. | * Are the PoP's correct? After a PoP change, the PoP's are sometimes not updated in CD or ople. | ||
| Line 26: | Line 26: | ||
| * Check the instrument alignment. Is flux getting through to the detector? How long has it been since the last NIRO camera alignment? Classic and CLIMB programs can run for about an hour before the light will drift from the central pixel. Use the Classic or CLIMB gui to view the light on the pixels by clicking the PICTURE tab and then the PIXEL AREA button. Turn the camera off after a few seconds to avoid crashing NIRO. Is the right dither power turned on? CLIMB 1 and Classic use different dithers. If Classic or CLIMB fringes are found in a scan, but not when in recording mode, the dither powers are likely not on. Are the camera settings correct for the seeing conditions and flux levels? | * Check the instrument alignment. Is flux getting through to the detector? How long has it been since the last NIRO camera alignment? Classic and CLIMB programs can run for about an hour before the light will drift from the central pixel. Use the Classic or CLIMB gui to view the light on the pixels by clicking the PICTURE tab and then the PIXEL AREA button. Turn the camera off after a few seconds to avoid crashing NIRO. Is the right dither power turned on? CLIMB 1 and Classic use different dithers. If Classic or CLIMB fringes are found in a scan, but not when in recording mode, the dither powers are likely not on. Are the camera settings correct for the seeing conditions and flux levels? | ||
| + | |||
| ===== Restarting Servers ===== | ===== Restarting Servers ===== | ||
chara/trouble_shooting.txt ยท Last modified: 2024/06/18 00:21 by charaobs
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
