This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
chara:trouble_shooting [2023/07/06 07:50] gail_stargazer |
chara:trouble_shooting [2023/07/27 20:10] gail_stargazer |
||
---|---|---|---|
Line 195: | Line 195: | ||
S2's acquisition server resides on " | S2's acquisition server resides on " | ||
+ | |||
+ | ==== Focusing the Telescope ==== | ||
+ | |||
+ | - Fully align beacon to labao and TWFS, especially making sure the focus terms between the two agree very well. | ||
+ | - Open a secondary gui: mergurygtk W2_SECONDARY. | ||
+ | - Note the current M2 actuator positions and send them to Nic for the log. | ||
+ | - Turn off the beacons and lock the star on TWFS tiptilt. | ||
+ | - Turn the servo on in the mercurygtk gui. | ||
+ | - On the align tab of the wfsgtk there is a button for FOCUS SCOPE. | ||
+ | - Press the button. | ||
+ | - When done the focus term of starlight on the TWFS should be zero. | ||
+ | - Turn off the servo on the mercury_gtk gui. | ||
+ | |||
+ | A couple of notes: | ||
+ | |||
+ | * If large moves of M2 are made, tiptilt tracking may be lost. Pay careful attention so that M2 doesn' | ||
+ | * If it takes too long to start the autofocus procedure, the mercury_gtk servo will automatically turn off and nothing will happen. So just make sure the servo is on right before hitting the FOCUS SCOPE button. | ||
===== Dome issue ===== | ===== Dome issue ===== |