Differences

This shows you the differences between two versions of the page.

--- chara:new_operating_procedures [2025/04/26 15:51]
bflores [Alignment Sequence for IR Combiners: MIRC-X/MYSTIC, CLASSIC/CLIMB, SILMARIL]
+++ chara:new_operating_procedures [2025/04/26 16:28] (current)
bflores [Alignment Sequence for Visible Combiners: SPICA and PAVO]
@@ Line 1: / Line 1: @@
 ====== New Operating Procedures ======
-Last updated 04/22/2025
+Last updated 04/26/2025
 Any major updates made to the wiki, please send an email to the gsu "charaengineering" email list summarizing new changes.
@@ Line 831: / Line 831: @@
       - Wait a few seconds to let the star fill up the wfs.
   - Lock star on telescope AO servo (**[****DM]**  button on obsgtk). Both TT and DM servos should be on now.
+  - <font 14px/Aptos,sans-serif;;inherit;;inherit>If needed, move TWFS boxes (use popup from **ADJ** button on obsgtk) to** get star centered and evenly illuminated on ACQ hole.**</font> - <font 14px/Aptos,sans-serif;;inherit;;inherit>(Note: you might need to close DM AO loop during this step.)</font>
   - Turn on the blue beacon
   - Make sure **DMTilt is green**
@@ Line 905: / Line 906: @@
   - Turn off blue beacon and lock star on **[TT]**  only.
   - Lock star on telescope AO servo (**DM**  button on obsgtk). Both TT and DM servos should be on.
+  - If needed, move TWFS boxes (use popup from **ADJ**  button on obsgtk) to** get star centered and evenly illuminated on ACQ hole.**
+      - (Note: you might need to close DM AO loop during this step.)
   - Turn on the blue beacon.
   - Turn on DMTilt (will turn green).

The CHARA Array Wiki

User Tools

Site Tools

Differences

Page Tools