User Tools

Site Tools


chara:coude_alignment_procedure

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
chara:coude_alignment_procedure [2021/06/02 22:59]
gail_stargazer
chara:coude_alignment_procedure [2021/06/02 23:09]
gail_stargazer
Line 3: Line 3:
 Written by Judit Sturmann on 2021 June 1. Written by Judit Sturmann on 2021 June 1.
  
-==== Preparation  ====+==== Preparation ====
  
   * Make sure the vacuum is below 5 torr in the pipe.   * Make sure the vacuum is below 5 torr in the pipe.
Line 50: Line 50:
   * Go to the AOB ENG tab on the hut engineering gui and save the new default M7 position by hitting the “DICHROIC POSITION” (or similar) button, and then “SAVE ..(stg)”. [<this button is in the same row as the DICHROIC POSITION button.] A new configuration file is now saved, that also includes the tilts of beacon flat, AOB splitter, and focuses.   * Go to the AOB ENG tab on the hut engineering gui and save the new default M7 position by hitting the “DICHROIC POSITION” (or similar) button, and then “SAVE ..(stg)”. [<this button is in the same row as the DICHROIC POSITION button.] A new configuration file is now saved, that also includes the tilts of beacon flat, AOB splitter, and focuses.
  
-====    Revision History   ====+==== Revision History ====
  
-  * Gail Schaefer added to wiki page on 6/2/2021.+  * 2021Jun01 - Document written by Judit Sturmann. 
 +  * 2021Jun02 - Gail Schaefer added to wiki page
 +  * 2021Jun02 - Removed link for [[https://docs.google.com/document/d/1UY5C8Pkbi_yd448aF_TXXE9KFkwjd5VK3LALvkFahjQ/edit|old Coude alignment procedure]] (googledoc created ). 
 +  * 2021Jun02 - Remove link for [[:chara:azimuth_coude_alignments|old Azimuth Coude Alignments]] (wiki page created 2018).
  
  
chara/coude_alignment_procedure.txt · Last modified: 2021/06/02 23:11 by gail_stargazer