The CHARA Array Wiki

User Tools

Site Tools

Trace:
chara:emergency_information

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
Last revision Both sides next revision
chara:emergency_information [2017/11/03 16:06]
127.0.0.1 external edit 		chara:emergency_information [2018/07/05 08:59]
jones
Line 1: Line 1:
-====== {{/file/view/Picture_23.png/213862890/47x43/Picture_23.png|Picture_23.png}}EMERGENCY INFORMATION ====== +{{chara:files:Picture_23.png|Picture_23.png}}====== EMERGENCY INFORMATION ====== 
-\\  __\\ \\ **Emergency Shutdown Procedure:**\\ \\ **If danger is imminent:**1. Press END NIGHT on Cosmic DebrisThis will begin the stow process and close the covers of the telescopes, even if telescopes are not stowed and you have to leave, cut the drive powers on the power gui. Try to let them stow, but if time is critical, hopefully the elevation will be at stow at least.\\ 2. Close the dome slits (even if the dust covers are not entirely closed) right after the END NIGHT button was pressed. It will take a few minutes for them to close anyway.\\ \\ **If you have more than 10 minutes, add the following:**3. Power off the following computers through the power gui:\\ +\\  __\\ \\ **Emergency Shutdown Procedure:**\\ \\ **If danger is imminent: \\ 
 + 
 +**1. Press END NIGHT on Cosmic Debris\\ This will begin the stow process and close the covers of the telescopes, even if telescopes are not stowed and you have to leave, cut the drive powers on the power gui. Try to let them stow, but if time is critical, hopefully the elevation will be at stow at least.\\ \\ 2. Close the dome slits (even if the dust covers are not entirely closed) right after the END NIGHT button was pressed. It will take a few minutes for them to close anyway.\\ \\ **If you have more than 10 minutes, add the following:\\ 
 +**3. Power off the following computers through the power gui:\\ 
  
   * Ople   * Ople
Line 12: Line 15:
   * XPS   * XPS
   * and the TT CCD and then the cooler.   * and the TT CCD and then the cooler.
- Once all the covers are closed, power off the ACQ/TEMA for each telescope.\\ 4. Run to the lab, power off the vacuum pump, ople rack (regardless of where the carts are), LabAO electronics\\ 5. Leave all the vacuum valves open, and use the two valves on the wall behind ctrscrut monitors to slowly let air into the pipes to avoid explosive recompression. Dial valve about 1/2 way open, T-valve about 1/2 way open. \\ \\ **Make sure you only do what you have time for. Beyond closing the domes and covers, and cutting the power to the telescope drives, do not risk life or limb to do other things on this list.**\\+ Once all the covers are closed, power off the ACQ/TEMA for each telescope.\\ \\ 
 +4. Run to the lab, power off the vacuum pump, ople rack (regardless of where the carts are), LabAO electronics\\ \\ 
 +5. Leave all the vacuum valves open, and use the two valves on the wall behind ctrscrut monitors to slowly let air into the pipes to avoid explosive recompression. Dial valve about 1/2 way open, T-valve about 1/2 way open. \\ \\ **Make sure you only do what you have time for. Beyond closing the domes and covers, and cutting the power to the telescope drives, do not risk life or limb to do other things on this list.**\\
 ---- ----
 ====== FIRE ====== ====== FIRE ======
chara/emergency_information.txt · Last modified: 2022/02/10 14:31 by charaobs

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki