The CHARA Array Wiki

User Tools

Site Tools

Trace:
chara:new_alignment_procedures

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
chara:new_alignment_procedures [2023/09/22 20:01]
gail_stargazer 		chara:new_alignment_procedures [2023/09/22 20:02] (current)
gail_stargazer
Line 1: Line 1:
 ====== New Alignment Sequences ====== ====== New Alignment Sequences ======
 +
 +**THIS PAGE IS NO LONGER MAINTAINED** - See relevant sections in the [[:chara:new_operating_procedures|New Operating Procedures]].
  
 At the start of the night, align the red and blue beacons following the "Beacon Alignments" section in the [[:chara:new_operating_procedures|Operating Procedures]]. These alignments should be done with the telescope at stow with M7 in the default position. During this process, use the Dichroic to align the blue beacon to the labAO WFS. Because we are no longer sending M7 to the default position during the slew sequence, this is the only time that we should adjust the dichroic. At the start of the night, align the red and blue beacons following the "Beacon Alignments" section in the [[:chara:new_operating_procedures|Operating Procedures]]. These alignments should be done with the telescope at stow with M7 in the default position. During this process, use the Dichroic to align the blue beacon to the labAO WFS. Because we are no longer sending M7 to the default position during the slew sequence, this is the only time that we should adjust the dichroic.
chara/new_alignment_procedures.1695427260.txt.gz ยท Last modified: 2023/09/22 20:01 by gail_stargazer

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki