User Tools

Site Tools


chara:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
chara:start [2022/03/11 11:15]
gail_stargazer created
chara:start [2022/03/11 19:12] (current)
gail_stargazer
Line 13: Line 13:
   * The second will create a random set of positions with a given power spectrum for a specified actuator. You can set the maximum frequency and the -3dB point for the power spectrum. You can also set the number of frequencies used to create the rando series.   * The second will create a random set of positions with a given power spectrum for a specified actuator. You can set the maximum frequency and the -3dB point for the power spectrum. You can also set the number of frequencies used to create the rando series.
   * The final panel allows you to collect WFS data. These data are converted to actuator space using the current reconstructor before saving. You can set an amount of smoothing and how many samples you wish to collect. If you collect two sets, one with the servo on and one with the servo off, you can then plot the power spectrum of the mean of all actuators, the mean of the outside edge or center actuators, or a single actuator. This can be be power spectrum of the actuator motion with the servo on, the servo off, both at once or the closed loop performance or open loop performance of the servo.   * The final panel allows you to collect WFS data. These data are converted to actuator space using the current reconstructor before saving. You can set an amount of smoothing and how many samples you wish to collect. If you collect two sets, one with the servo on and one with the servo off, you can then plot the power spectrum of the mean of all actuators, the mean of the outside edge or center actuators, or a single actuator. This can be be power spectrum of the actuator motion with the servo on, the servo off, both at once or the closed loop performance or open loop performance of the servo.
 +
 +{{:chara:files:wfs_s2.png?direct&|wfs_S2.png}}
 +
 +Telemetry data can be saved from the wfsgtk (command, example, wfsgtk S1). The telemetry data saves all the relevant information to see how the AO closed loop performance is.
 +
 +The telemetry data are saved in /ctrscrut/chara/data/, an example file is 2021_06_09_wfs_S2_telemetry_003.fits.
 +
 +All the previous archived telemetry data can be found in /ctrscrut/archive/on_sky/moved_to_archive.
 +
 +References for CHARA AO:
 +
 +[[https://doi.org/10.1117/12.2056662|https://doi.org/10.1117/12.2056662]]
 +
 +[[https://doi.org/10.1117/12.927031|https://doi.org/10.1117/12.927031]]
 +
 +[[https://doi.org/10.1142/S2251171713400072|https://doi.org/10.1142/S2251171713400072]]
 +
 +[[https://doi.org/10.1117/12.2561560|https://doi.org/10.1117/12.2561560]]
  
  
chara/start.1647015323.txt.gz ยท Last modified: 2022/03/11 11:15 by gail_stargazer